A pair of shoe trees is the essential complement to any pair of beautiful shoes. The best shoe trees are used to keep shoes “in shape” when they are not worn. They tend the leather of the shoe, avoiding that these deform and that the folds of March mark the too important way. They are also used to absorb the moisture present in the shoe, due to perspiration or rain. For this purpose, they must be chosen raw wood, preferably red cedar which has a significant absorption and which also pleasantly perfumes the shoe closet.
THE ROLE OF THE SHOE TREE
In addition to wearing your shoes, you are walking. With each step, the shoe is deformed more or less according to the zones. Some materials such as rubber suffer from “plastic” deformations. In other words, you do not perceive degradation. Other materials such as leather, will clearly show brands at the most requested locations.
The combination of these two effects can have serious consequences on your shoes during rest after port. Like a sheet that you let dry in the cap, you will get the next use a shoe marked by these deformations and crumpled.
In addition to good maintenance, cleaning, and hydration, the only way to keep your shoes in shape is to put them on shoe trees after each port. Unlike a sheet that you could iron after the fact, the leather of your shoe must be stretched during drying. That’s when the shoe tree comes in.
Note: We often talk about the shoe tree as a way to dry your shoes. Actually, the shoe or boot must dry before being worn again, but this is not the main role of the shoe tree. It can accelerate drying if the shoe does not have time to dry alone between two ports, but its primary role is keeping fit during drying.
What we like
- Made of best quality Cedarwood
- Absorbs the sweat and odor from the shoes
- Imparts a pleasant cedar fragrance to the shoes
- The split helps to expand the shoe tree further, which helps to keep the shoes in the perfect size
- Not pointed at the edges
What we don’t like
- Not ideal for the pointed shoes
- The width of the shoe tree is very small in the heel part.
- The golden coating on the rod may tend to fade with the passage of time
If you are looking for the Best Shoe Trees which can easily absorb the moisture and impart a good fragrance at an affordable price, then you may go ahead and buy this high-quality Best Cedar Shoe Trees.
What we like
- Made of best quality Cedarwood
- Absorbs the sweat and removes the dirty odor
- Not pointed at the edge of the shoes
- Have a broad heel part
- Imparts the fragrance of the cedar wood
What we don’t like
- Not ideal for shoes with pointed edges
- The width of the shoe cannot be enlarged as there is no split
- The golden coating on the rod may tend to fade after repeated use
These Shoe Trees are ideal to maintain your shoe without wrinkles and perfectly keeps the shoe in size. If you are looking for an affordable best quality shoe tree, then this is the one.
What we like
- Made from genuine cedar wood
- A double vent is present at the front part of the shoe
- The length of the rod can be adjusted with an adjustable spring that is present inside the heel part of the shoe tree
- Can be easily removed from the shoe with the help of the hook present at the top of the heel part
- Imparts the sweet fragrance of the cedar wood to the shoes
What we don’t like
- The split is absent so the width cannot be adjusted
- Not ideal for pointed shoes as the end is highly curved in shape
- The spring may get loosened after repeated use
This shoe tree is ideal for people looking for a shoe tree that is easy to handle and is affordable in price.
What we like
- Can be easily bent and inserted into the shoe
- Have split in the front
- Can be easily removed from the shoe due to the presence of the hook at the heel part
- Have a smoothly curved and polished body
- Imparts the smell of cedar wood to the shoes at the same time absorb the sweat and moisture
What we don’t like
- Not ideal for shoes with the pointed edge
- The rods may lose its golden color after sometime
- The springs may become loose after repeated use
If you are looking for the Best Shoe Trees that is easy to use, absorbs the moisture and has an affordable price, then this is the right one for you.
What we like
- Can be easily inserted and removed
- The shoe tree has split which helps to increase the width of the front part
- The width of the heel part is large enough to prevent the shoes from developing wrinkles
- Absorbs moisture and odor really fast
- The smell of crisp cedar is imparted onto the shoe after the use of the shoe tree
What we don’t like
- The edge is highly curved, so cannot be used for pointed shoes.
- The color of the rod fades after a certain period
- The spring action may lose its ability to stretch and contract after repeated use, so care must be taken.
The product is ideal for a person who is looking for an affordable shoe tree which is easy to use and handle.
What is a shoe tree?
To maximize the longevity of your shoes, it is advisable not to wear them for two consecutive days. This precaution allows them time to dry naturally. Some recommend a rest period equivalent to two days, others recommend waiting at least 24 hours before putting on your shoes again. To ensure this rest time, it is necessary to organize a rotation. This involves having a minimum of 3 to 7 pairs of shoes.
While waiting for you to reserve your shoes, it is essential to use a pair of preferably wooden shoe trees in order to:
- allow the leather to breathe and breathe;
- to tighten the leather;
- to reduce the folds of ease;
- keep their shape.
The different types of shoe trees
The solid wood shoe trees
The shoe trees can be in raw or varnished wood. They are usually made of beech or cedar. Articulated, they adapt perfectly to the particular volume of your shoes.
Plastic shoe trees
Lightweight and practical to carry, plastic shoe trees take the favor of travelers.
Spring or spring tree shoe trees
Practical to install, these accessories (consisting of a shell and a ball, connected together by a flexible rod) have the disadvantage of long-term damage to the buttress shoes.
HOW TO CHOOSE YOUR SHOE TREES?
Have you just bought a new pair of shoes and are already dreading the time to wear them outdoors for the first time? Do not panic, we present you with a simple accessory to use every day to contribute to the longevity of your shoes. During the process of manufacturing a shoe, the flat surface of the leather is stretched on a “shape”, thus giving it volume and thus its final shape. But the daily use of your shoes relaxes their leather thus forming folds of ease and your shoes then lose their basic form. These pieces of wood are to slip into your shoes as soon as you remove them. In addition to allowing them to retain their original shapes, the tree branches gradually absorb residual moisture. due to perspiration and weather conditions, which gradually weaken the leather of your shoes.
Which subject to choose?
Choose them in natural wood such as beech, cedar or cherry, with a preference for Lebanon red cedar (the must in the field) which has strong absorbent properties and diffuses a pleasant smell and away mites from your locker room. Be careful to choose the size of your shoe trees, adapted to your model, so that they do not damage the leather of your shoes and do not exert excessive tension on the buttresses back.
In addition, be careful and do not buy varnished shoe trees. Indeed, the varnish prevents the wood from absorbing moisture and the shoe trees will no longer play their roles. Similarly, although they are very cheap, plastic shoe trees are useless if it is to maintain the shape of your shoes. Nevertheless, they are very useful to frequent travelers because they are easy and light to carry. In addition, avoid spring tensioners, which create tension in the upper of your shoe and can distort the buttress heel.
Yes, but at what price?
For you in the development of your budget dedicated to the maintenance of your shoes, know that as often, the brand defines the price. You can find quality raw wood shoe trees from 30 USD, the prices amounting to more than a hundred euros for branded shoe trees. The ideal is the bespoke shoe trees, perfectly adapted to the shape of your shoe (from $700 ).
Finally, the most important is not to wear the same pair of shoes two days in a row to find it dry, flexible and “ready to wear”.
Use your shoe trees wisely
Insert the shoe tree by sliding its tip towards the front of your shoe. Stop your gesture when you feel resistance. At this point, squeeze the shoe tree to the side to gain width. The tip must fit perfectly. To place the back of the shoe tree without rubbing the heel, be sure to hold down the spring mechanism. The shoe tree is perfectly placed if it touches the insole and completely fills the interior space of the shoe.
Put your shoes on their shoe trees when the leather is still warm. If wet, lay them on the wafer by turning them at regular intervals to remove moisture. Do not try to speed up the drying time by storing your wet shoes near a heat source, the leather may be damaged.
Get the best fit for your shoes
A pair of shoes should be beautiful and feel even better. The primary purpose of a shoe is to support and protect your foot, and a well-made shoe will reduce the tiredness and pain you feel after long hours standing or walking. But even the finest shoes are rarely comfortable the first time you put them on your feet. Every shoe, whether it’s a pair of women’s dress heels, hiking boots or a pair of casual moccasins, requires a break-in period before being the most comfortable shoe.
To break shoes without causing pain or even injury to your feet, you can initially wear new shoes for short periods of time. Wear them for 10 to 15 minutes while walking and standing at home or in the office, wearing comfortable, worn out shoes (or just staying barefoot or in socks) during this time. Remember that just as your new shoes must fit your feet, your feet must adjust to a new pair of shoes.
The skin on the back of your heels is particularly prone to blisters when fitting a new shoe, but it hardens quickly and withstands additional damage. Taking the break-in process slowly can prevent the formation of blisters, which can be so painful that they force you to completely abandon the shoes.
If your new shoes need a significant stretch before being comfortable, there are many other methods besides just wearing shoes that you can try. Applying heat to a leather shoe using a hair dryer can help soften the material, making it softer when you slide your foot immediately after the warming process. At the other end of the spectrum, you can also use ice to help stretch a shoe.
This approach involves sliding bags filled with water into your shoes and then placing them in the freezer. As the water freezes, it expands and stretches slowly, evenly and evenly over the shoe. This method, however, may result in water damage, and it is a fairly complex undertaking. (Some people may also be reluctant to put shoes near their frozen foods, although this can be mitigated by placing the shoes in a larger plastic bag.
By far the easiest and most reliable way to stretch a pair of shoes other than wearing them is to use a shoe tree. These specially designed items can quickly help make your shoes more comfortable, and they can help maintain their shape and appearance even after years of use.
Choosing a shoe tree for comfort
All shoe trees are designed to stretch your shoe on their long axis, that is to say from the toe area (the area that surrounds and protects the toes) to the heel. This type of stretching can help reduce the pressure you feel on your toes, which is usually the area where the most severe friction and discomfort are caused by newer shoes. However, anyone with a wider foot, toe-shaped irregularities or an uncomfortable foot in other areas, a shoe tree that only extends the shoe in length may not be enough.
Many shoe trees are adjustable to extend into the toe box of the shoe, expanding the shoe to accommodate more comfortably the foot of the wearer. The shoe trees offering this type of stretching can potentially help even those with wider feet to enjoy regular shoes. Some shoe trees even come with extra accessories that can be attached to create custom embossed areas, allowing you to stretch a shoe where you need it.
Make sure to choose the appropriate specialized shoe tree for heels or dress shoes, and be sure to note whether the tree you are considering is gender-specific or not. Also, consider the material of the shoe tree: Cedarwood can reduce odors and wick away moisture, giving dry, comfortable shoes when you’re ready to wear them.
And if you plan to use your tree to help a shoe keep its shape between wear, be sure to slightly reduce the tension settings you used during its break: once a shoe fits comfortably to your it is unlikely to shrink again, so there is no need to apply excessive pressure during storage.
Choosing a shoe tree shoe to relieve pain
The comfort of the shoe is important for everyone, but it is for those who have feet afflicted with onions, arch problems or any other condition caused by genetics, injuries, age, surgery, etc. Using a shoe tree to reduce the pressure a shoe exerts on the compromised area is much better than just trying to wear the shoe and fighting the pain of the break-in process.
This is especially true for onions, which are too common and painful, and can be caused by a number of problems, particularly chronic use of tight shoes. An onion can always get worse, resulting in more pain, less mobility and potentially the need for surgery. To help reduce the exacerbation of your onions, use a shoe tree that can stretch the toe box of your shoe and keep the pressure on your big toe joint.
If you have the arch or medial foot problems, be sure to choose a shoe tree that can stretch the upper part of the shoe, reducing the pressure on your arches and accommodating any orthotic insoles you may need. Consider consulting your podiatrist before choosing a shoe tree or even for tips on how to make your shoes more personalized and comfortable.
What are the best shoe trees shoes?
Many people are unaware of the usefulness of shoe trees when they are actually very effective for shoe care. Why should you have at least one pair at home and how to choose the right model? Zoom on these points in the following.
What are shoeshine shoes for?
Shoe trees are objects that take the form of a foot. They are usually used to maintain the original shape of the shoes. Indeed, when the shoes are not regularly worn, folds can form on their surface. The shoe trees prevent these folds. But these objects also absorb the moisture caused by the daily wear of shoes. Indeed, the feet sweat and moisture settles. This moisture can also be the cause of the bad smell in some people. Thanks to the shoe tree, the inside of the shoe are ventilated, dried and deodorized.
Choose shoe tree shoe according to the materials
What will your shoe tree shoe be made of? The choice is yours between wood and plastic. Natural woods like cedar, beech or cherry are great because they are very absorbent and keep pests away. You can buy plastic shoe trees for use while on the move. Indeed, the wood will be heavier and cumbersome. Plastic items are lightweight and do not take up too much space. Once home, you quickly insert your wooden shoe trees to remove moisture and bad odors. Be careful, however, regarding the wooden shoe tree, because you will have a choice between natural models and varnished models. Those that are varnish will only serve to maintain the shape of the shoe since the varnish will have removed the function “moisture absorption”.
Choose shoe tree shoe according to model
You will find several models of shoe trees: turnbuckles, forefoot, full shoe trees and tailor-made. Solid models are the most popular because they fit all types of shoes. The idea is to have tailor-made shoe trees that will be perfectly adapted to the shape of the shoes. However, you could only use this model for a particular pair of shoes. The forefoot models are very useful for keeping the ends of boots, boots, and boots in good condition. You can buy tensioners while waiting to buy better models. These turnbuckles are not very efficient and are not durable either. By stretching the back of your shoe, the object may damage it over time. In all cases, Whichever style shoe you buy, do not base the maintenance of your shoes on this item. You should dust and wash your shoes. Never wear them for two days in a row, as the tree can not wick away moisture in one night. You must also give your shoes time to recover before wearing them again.
Best Shoe Trees are best to retain the shape and size of the shoe when it is to be left unused for a long period of time. Shoe Trees ensures that the shoes are free from odor and moisture. These can also be gifted.